Hello dear craftswomen! Amigurumi Cute Bat Free Crochet Pattern
I suggest you tie an unusual bat, which is very
loves limes.
Necessary materials:
1. Any yarn is yellow. I used yarn to knit a mouse
Alize Diva 350m / 100g. Hook number 1.6mm.
2. The yarn is light green in color for knitting the abdomen and limes. I used
YarnArt Begonia yarn 169m / 50g.
3. For knitting eyes used a thinner yarn Alize Miss 280m / 50g.
The color is white and black. Hook 1.0mm. Threads floss acrylic – green.
4. Any yarn of white, dark green and orange color for knitting
leaves and flower
4. Hook under your yarn. I used No. 1.65mm and No. 1.0mm.
5. Holofiber filler or syntepuh.
6. Wire for wings.
7. Material for wire winding – adhesive tape, electrical tape.
8. Needle for stitching.
9. White felt for teeth.
10. Thermal gun for gluing teeth and a flower.
Growth of the finished toy
when using the materials indicated by me – 15 cm (without ears),
20 cm (including ears).
The difficulty level is medium.
Legend:
Magic ring – amigurumi ring
Sc is a single crochet;
İnc – adding the Magic ring (knit 2 Sc from one loop of the previous row);
Dec – decrease (two loops together for the front walls);
Sl-st – connecting column;
Ch is the air loop;
Dc – double crochet;
Blo – knit for the back half loops;
Dc – double crochet;
Hdc – half crochet
Legs (2 parts):
Knit yellow yarn
1 row: 6Sc in Magic ring (6)
2 row: İnc, 5Sc (7)
3 row: İnc, 6Sc (8)
4 row: İnc, 7Sc (9)
5 row: İnc, 8Sc (10)
6 row: İnc, 9Sc (11)
7 row: İnc, 10Sc (12)
8 row: İnc, 11Sc (13)
9 row: İnc, 12Sc (14)
10 row: (not complete): 7Sc (7).
On one leg, cut and fasten the thread. Similarly, we knit the second leg,
just do not cut the thread.
Body:
We continue to knit with yellow yarn. Stuff the body as you knit.
We connect two legs together. We connect correctly!
Note: leg increases should be on the outside, see
a photo.
11 row: 4Ch, attach the second leg, 14Sc along the second leg, 4Sc along Ch,
14Sc on the first leg, 4Sc on Ch (36)
12 row: (5Sc, İnc) * 6 (42)
13 row: (6Sc, İnc) * 6 (48)
14-20 row: 48Sc (48)
21 row: (6Sc, Dec) * 6 (42)
22-25 row: 42Sc (42)
26 row: 8Sc, 2Dec, 17Sc, 2Dec, 9Sc (38)
Note: the decrease should be on the sides of the body. Do not forget to stuff.
27-28 row: 38Sc (38)
29 row: 8Sc, Dec, 18Sc, Dec, 8Sc (36)
30 row: (10Sc, Dec) * 3 (33)
31 row: (9Sc, Dec) * 3 (30)
32 row: 30Sc
33 row: (3Sc, Dec) * 6 (24)
34 row: (2Sc, Dec) * 6 (18)
Do not cut the thread, continue to knit the head.
Head:
We continue knitting with yellow yarn.
35 row: 18İnc (36)
36 row: (5Sc, İnc) * 6 (42)
37 row: (6Sc, İnc) * 6 (48)
38 row: (7Sc, İnc) * 6 (54)
39 row: (8Sc, İnc) * 6 (60)
40-50 row: 60Sc (60)
51 row: (8Sc, Dec) * 6 (54)
52 row: 54Sc (54)
53 row: (7Sc, Dec) * 6 (48)
We fill our heads in the course of knitting.
54 row: 48Sc (48)
55 row: (6Sc, Dec) * 6 (42)
56 row: 42Sc (42)
57 row: (5Sc, Dec) * 6 (36)
58 row: (4Sc, Dec) * 6 (30)
59 row: (3Sc, Dec) * 6 (24)
60 row: (2Sc, Dec) * 6 (18)
61 row: (Sc, Dec) * 6 (12)
62 row: 6Dec.
To fill. Cut and fasten the thread.
Ears (2 parts):
Knit with yellow yarn.
1 row: 6Sc in Magic ring (6)
2 row: (Sc, İnc) * 3 (9)
3-4 row: 9Sc (9)
5 row: (2Sc, İnc) * 3 (12)
6-7 row: 12Sc (12)
8 row: (Sc, İnc) * 6 (18)
9 row: 18Sc (18)
10 row: (2Sc, İnc) * 6 (24)
11 row: (3Sc, İnc) * 6 (30)
12-23 row: 30Sc (30)
24 row: (3Sc, Dec) * 6 (24)
25-28 row: 24Sc (24)
29 row: (2Sc, Dec) * 6 (18)
30-32 row: 18Sc (18)
Do not stuff. Cut the thread leaving a long end for sewing.
Wings (2 parts):
We knit yellow yarn in rotary rows.
1 row: 3Sc in Magic ring (3) turn
2 row: Ch, 3İnc (6) turn
3 row: Ch, (1Sc, İnc) * 3 (9) turn
4 row: Ch, (2Sc, İnc) * 3 (12) turn
5 row: Ch, (3Sc, İnc) * 3 (15) turn
6 row: Ch, (4Sc, İnc) * 3 (18) turn
7 row: Ch, (5Sc, İnc) * 3 (21) turn
8 row: Ch, (6Sc, İnc) * 3 (24) turn
9 row: Ch, (7Sc, İnc) * 3 (27) turn
10 row: Ch, (8Sc, İnc) * 3 (30) turn
11 row: Ch, (9Sc, İnc) * 3 (33) turn
12 row: Ch, (10Sc, İnc) * 3 (36) turn
13 row: Ch, (11Sc, İnc) * 3 (39) turn
14 row (not complete): 3Ch, 2Dc, 2Hdc, 1Sc, 3Sl-st, 1Sc, 2Hdc, 2Dc, 13Sc
(26) turn
15 row: Ch, 13Sc (13) turn
16 row: 3Ch, 2Dc, 2Hdc, 1Sc, 3Sl-st, 1Sc, 2Hdc, 2Dc, 3Ch, Sl-st in the loop
previous row (see photo), 2Dc, 2Hdc, 1Sc, 3Sl-st, 1Sc, 2Hdc, 2Dc
(26)
Do not cut the thread, we will tie the wing. We take a thin wire
the size is slightly larger than the wing (approximately 10cm, excess cut off). One
wrap the end with adhesive tape. Not very thick, otherwise it will be difficult
hide with threads. Attach the wire to the wing and tie Sc
only the upper part of the wing. Wire end wrapped
should not look out with a band-aid, move it a little closer to the middle
wings (see photo). Cut the thread leaving a long end. Neatly
we trim with a thread those places where the adhesive plaster is noticeable. Fasten the thread and
crop.
Similarly, we knit the second wing.
Note: We tie the wire on the second wing on the other side,
so that you don’t get two right or two left wings. Be guided by
to your wings.
Eardrums on wings:
We knit the membranes with yellow yarn on the back of the wings, in those places
where were the increases. Do not tighten the hinges so that the wing does not contract. Enter
hook to the very top of the wing and put the loop on the side where
there will be membranes. Insert the hook with the loop again into the same loop and
pull a row below, grab the thread and knit Sc. We knit so until
the bottom. Cut and fasten the thread.
Similarly, we knit the remaining 3 membranes.
Tummy:
We start knitting with white yarn.
1 row: 6Sc in Magic ring (6)
Change the thread to light green.
2 row: 6İnc (12)
3 row: (1Sc, İnc) * 6 (18)
4 row: (2Sc, İnc) * 6 (24)
5 row: (3Sc, İnc) * 6 (30)
Change the thread to white.
6 row: (4Sc, İnc) * 6 (36)
Change the thread to green.
7 row: (5Sc, İnc) * 6 (42)
Cut the thread, leaving a long end for sewing. White yarn
embroider strips on a tummy-lime circle.
Tail:
Knit with green yarn.
1 row: 6Sc in Magic ring (6)
2 row: ZZP 6Sc (6)
3-5 row: 6Sc (6)
6 row: 6İnc (12)
Cut the thread, leaving a long end for sewing.
Leaves (2 parts):
Knit with green yarn.
1 row: 10Ch from the 2nd loop from the hook 3Sl-st, 1Sc, Hdc, Dc, Dc, Dc, Hdc,
3Ch, on the back: Hdc, Dc, Dc, Dc, Hdc, 1Sc, 3Sl-st.
Flower:
Knit with a white thread.
1 row: 6Sc in Magic ring (6)
2 row: Sc, 5Ch, from the 2nd loop from the hook 4Sc, Sc to the base) * 6
You should get 6 petals. In the middle we stretch the loops
orange thread. We fix it, you can glue so that the middle is not
stretched out. Cut the thread. If the flower will be sewn, leave
long end. I glued a flower to my head with a gun, so
fixed the thread and cut it.
Eyes (2 parts):
We knit with a thinner thread, you can use threads for knitting a mouline thread
acrylic in two additions. Hook number 1. I used Alize Miss yarn (white
and black colors). For the iris, I took green thread floss.
We knit black yarn, hook number 1.
1 row: 6Sc in Magic ring (6)
2 row: 6İnc (12)
3 row: (Sc, İnc) * 6 (18)
Change the thread to green.
4 row: (2Sc, İnc) * 6 (24)
5 row: (3Sc, İnc) * 6 (30)
Change the thread to white.
6 row: (4Sc, İnc) * 6 (36)
Cut the thread, leaving a long end for sewing. Embroider white
flare flare.
Decor:
Fix the ears with needles on the head so that they are
symmetrical. Sew on. Sew the tummy, tail, leaves and
flower. The flower can be glued with a thermal gun.
Sew on eyes, embroider nose and mouth. From felt to cut two small
tooth and stick them or sew.
We sew the wings with membranes inside. Wrap the ends of the wire
with a band-aid and insert in the middle of the mouse body. Sew carefully
wings to the body.
Big lime
We knit light green yarn.
1 row: 6Sc in Magic ring (6)
2 row: (Sc, İnc) * 3 (9)
3 row: 9Sc (9)
4 row: (2Sc, İnc) * 3 (12)
5 row: (Sc, İnc) * 6 (18)
6 row: (2Sc, İnc) * 6 (24)
7 row: (3Sc, İnc) * 6 (30)
8-16 row: 30Sc (30)
We fill in the course of knitting.
17 row: (3Sc, Dec) * 6 (24)
18 row: (2Sc, Dec) * 6 (18)
19 row: (Sc, Dec) * 6 (12)
20 row: (2Sc, Dec) * 3 (9)
21 row: 9Sc (9)
22 row: (Sc, Dec) * 3 (6)
Trim, fasten and hide the thread inside the lime.
Little lime
We knit light green yarn.
1 row: 6Sc in Magic ring (6)
2 row: 6Sc (6)
3 row: (Sc, İnc) * 3 (9)
4 row: 9İnc (18)
5-10 row: 18Sc (18)
We fill in the course of knitting.
11 row: (Sc, Dec) * 6 (12)
12 row: (2Sc, Dec) * 3 (9)
13 row: (Sc, Dec) * 3 (6)
Trim, fasten and hide the thread inside the lime.
All!! Our bat Limeka is ready !! Thank you for using
my master class !!
Free
Peel:
Magic ring (6)
1 p.: 6 İncibs (12)
2 p.: (Sc, İnc) * 6 (18)
3 p.: 18 Sc (18)
4 p.: (2 Sc, İnc) * p (24)
5-8 p.: 24 Sc (24)
Fasten the thread, cut.
I have a thread for the peel a little thicker than white and yellow, because the cut is larger
increase. If the threads are all the same, then the 5th row is not needed.
Slice:
White thread Magic ring (6). Change the thread to yellow.
1 p.: 6 İncibs (12)
2 p.: (Sc, İnc) * 6 (18)
4 p.: (2 Sc, İnc) * 6 (24)
5 p.: 1 Sc, İnc, (3 Sc, İnc) * 5, 2 Sc (30)
Change to the color of the peel
6 pp.: 30 Sc (30).
Cut the thread, leaving the end for stitching. White thread embroider strips.
Precisely because of the different number of loops, I did not bind, but sewn.